How To Replace Joystick On Xbox One Controller

Xbox One controllers article of clothing out a lot quicker than you lot'd similar, especially if you lot're a heavy gamer. Just, before y'all go running to buy a new 1, think well-nigh repairing the 1 you have. If information technology still fundamentally works as it should merely something is cleaved or worn, you tin can save a parcel by doing a home repair job.

In the example of the thumbsticks, they're prone to wearing out, or worse, since they're only plastic. If y'all demand to supercede them, it's non really that hard.

Here's everything you need to know.

Replacement Xbox I Thumbsticks (about $x)
Plastic pry tool (about $5)
Torx T8 screwdriver (almost $5)

The latter two items are useful for other things, also, and they'll exist universal for any repair or customization work y'all practice on your Xbox I Controller. You can get a toolkit with both in for virtually $ten.

A pair of regular blackness thumbsticks is about $ten, but in swapping them out you lot could also go for some different colors or styles. As long as they're compatible with the Xbox One controller, the method remains the same.

How to supervene upon Xbox I controller thumbsticks

Because the thumbsticks are on the front end and all the screws to hold the controller together are on the back, you'll demand to practise a complete teardown by following these steps.

Remove the battery door.
Remove the batteries from the controller.
Utilize the plastic pry tool to detach the rear grips from the controller body. (Once you've separated them, pull firmly to remove them from the body.)
Yous at present accept five screws to remove equally shown in the image with the T8 screwdriver. (The fifth is located beneath the bombardment characterization so you'll take to pierce it or remove information technology entirely.)
Pull the backplate abroad from the controller trunk.
Flip the controller around and pull the faceplate abroad from the controller trunk.
Pull the thumbsticks direct up to disassemble from their poles.
Button your new thumbsticks downwards on the poles.
Repeat the steps above in reverse to reassemble your controller.

Note, if you have an actual issue with the thumbstick machinery, such as migrate or misalignment, replacing the thumbsticks won't fix this. But if y'all've got some nasty looking worn sticks, for a few dollars and 15 minutes of your time, you'll be stock-still up quickly.

How to add trigger stops to a regular Xbox One controller for but $twenty

We may earn a commission for purchases using our links. Learn more.